• Automatically complete pole-tab laser cutting, knife slicing, and rewinding.
• Use high speed precision mirror and corresponding mirror control system, double laser head cutting , so it greatly doubles the processing speed and efficiency
• Laser cutting with its own intellectual property of the circular roller surface cutting technology, effectively solve the problem of laser cutting crystallization point.
• Using dust protection technology with its own intellectual property to effectively reduce the impact of dust generated by laser cutting on the battery
• Using PSO control technology, it can accurately control the single-point energy and output at the specified position. The laser frequency control can avoid over cutting or being not cutting through, and effectively control the burrand heat affected zone.
• Pole piece can be automatically entered into the box, have alarm function for material fully filled.
• Equipped with positive and negative non-contact brush powder mechanism to ensure the surface cleanliness of the pole piece
• Equipment Control System can meet EMS requirement.
• CCD size detection and defect inspection functions can be installed on this.
Laser Electrode Making Machine
||≤Φ700mm (double roll)
||fiber laser (infrared)
|Number of lasers
|| 2 sets
|Cutting line cutting speed
|Electrode walking belt speed
||30~45m/min (related to the thickness of the electrode material)
|Heat affected zone
||less than 250um for positive, less than 200um for negative pole
|Cutting burr precision
||AC380V±10%, three-phase five-wire, 50Hz
|Weight per square meter
|Machine size (length X width X height)